Water bore cleaners are tools that can help remove iron-related bacteria and other contaminants from your water system. These chemicals are applied to the bore, or hole, of a water pipe. They break down and flush the impurities out into the main water supply or supply you are connected to. In many cases, these chemicals are used as an alternative to disinfecting the pipes. Though, the question you might have is how do they work, and why would anyone want to buy a Water Bore Cleaner.
There are two common types of water bores available on the market today. One uses a volatile organic compound (VOC) that vaporizes quickly and then turns into a gas. The second type uses chlorine and uses less vapor but lasts longer. If you are using one of the newer models of these systems, it will need to pass an ozone air quality test before it is effective for your purposes.
When looking for a water bore cleaner, there are a couple things to consider. First, how much does the unit cost? Second, is it necessary to use one? Before you buy a water bore cleaner, you should check your local water supply to see what levels are safe for your drinking supply. If your water has low levels of dissolved iron-related bacteria or other contaminants, it is probably not necessary to buy a system that removes these items.
Water bore cleaning systems will usually cost between three hundred dollars, all the way up to one thousand dollars. Some of the more popular brands that offer this service include Chemengine, Culligan, Eureka, Kinetico, and Linkshare. Some of the cheaper brands do not work as well and do not clean as thoroughly. Some models are simply not strong enough to remove the larger water bores, or are not made well. Regardless of price, you still want a system that is going to effectively clean your irrigation equipment caused by iron-related bacteria.
It is important to find a unit that fits your needs. The system needs to be able to remove the largest amount of water, while at the same time not requiring too much of your time. If the system is too difficult to clean or requires too much of your attention, then you may be better off just replacing your water source with a new one. You should also check to see if the unit can be easily maintained. Some simply allow you to change tap water, remove and store sediment, and clean the filter.
What kind of results should you expect from a water bore cleaner? The results will vary depending on the brand that you choose. Some work better at removing iron from the water than others, and some are simply not as effective. Before you purchase a water bore cleaner, you should look at the performance ratings to determine which products give you the best results.
What are some of the other things to consider when buying a water bore cleaner? Another thing to consider before buying would be what type of warranty is provided. Many come with limited warranties, while others provide up to ten year warranties. If you are planning on purchasing a water bore cleaner that is used on a regular basis, then you will probably want to buy the warranty. However, if you are only going to use it once or twice a year, then it really does not matter whether it has a long warranty or not.
One last thing to keep in mind when looking for a water bore cleaner is how easy it is to operate. You should make sure that the system fits securely in the water source and that you do not have to manually turn the valve on and off. Some models simply require the user to turn a wrench and push a button to start cleaning the water. If possible, find one that requires no more than ten minutes of operation time.